RUUD RH1T2417STANJA

Aluminum Multi-Position Air Handlers

• Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications
• Rugged steel cabinet construction with 1" of foil-faced insulation mechanically retained in blower compartment
• Attractive pre-painted cabinet exterior
• Field-installed auxiliary electric heater kits with circuit breakers meet
  UL and cUL requirements for service disconnect (sold separately)
• 4-Leg blower motor mount
• Slide-out blower housing with integrated controls, motor and blower
• Combustible floor base accessories available (sold separately)
• Indoor coil design provides low air side pressure
  drop, high performance and compact size
• Coils are factory-tested with an extensive refrigerant leak check
• Copper sweat connections and chatleff metering device connections on coils
• Molded polymer corrosion-resistant condensate drain pan on all indoor coils
• Supply duct flanges provided as standard on air handler cabinet
• Provisions for field electrical connections available
  from either side or top of air handler cabinet
• Concentric knockouts are provided for power connection to cabinet
• Front refrigerant and drain connections
• Thermal expansion valve
• AHRI Certified
• cULus Listed
• Limited warranty (registration required)
• 10-Year conditional limited warranty on parts

R-410A RH1T Standard Efficiency Multi-Position Single-Stage Constant Torque ECM Air Handler

• Efficiencies up to 16 SEER
• Enhanced airflow up to 0.7" external static pressure
• Suitable for application in mobile homes
• Cabinet air leakage at less than 2% at 1.0"wc when tested in accordance with ASHRAE Standard 193
• Traditional open wire element design for heat applications
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil