PARAGON D877-20

RM Series Defrost Controls

• Frame modules:
• (4) or (8) Circuits available
• (2) Snap-in base brackets per
  frame section for mounting
• 7/32" Diameter mounting
  holes for #12 screws
• Motor modules:
• Heavy duty synchronous
  industrial type motor with sealed,
  permanently lubricated gear train
• Up to (24) program modules can be driven with one motor
• Input: 120 or 208-240V, 60Hz
• (2) 1/4" Male push-on terminals on drive module
• Program modules:
• Defrost initiation is adjustable from 1 to 12 operations per circuit, per day; minimum 2 hours required between successive operations
• Mechanical defrost termination is adjustable from 6 to 106 minutes in 1-minute increments
• Solenoid termination is optional. Instantaneous transfer if solenoid is energized at time of defrost initiation.
• (2) SPDT Snap switches per module
• 3/16" Male push-on switch terminals
• Switch rating: 10A, 1/3 hp, 120/240VAC; 345VA pilot duty

RM Series Defrost Control Program Module

• Defrost initiation is adjustable from (1) to (12) operations per circuit, per day; minimum (2) hours required between successive operations
• Mechanical defrost termination is adjustable from (6) to (106) minutes in 1-minute increments
• Solenoid termination is optional
• Instantaneous transfer if solenoid is energized at time of defrost initiation
• (2) SPDT Snap switches per module
• 3/16" Male push-on switch terminals
• Switch rating: 10A, 1/3 hp, 120/240VAC; 345VA pilot duty
• UL Recognized; CSA recognized